How to Use Xhorse VVDI Key Tool MAX Pro New Features?

This is an instruction on how to use Xhorse VVDI Key Tool MAX Pro new features: including remote charge battery, test leakage current and voltage detection. Read this post to learn the procedure.


Check full video:


How to Charge a Key?

Special function >> Remote charge battery

Put a rechargeable key into KEY TOOL MAX Pro slot.

Press "OK".

The device will start to charge.

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-1

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-2


How to Test Leakage Current?

Before testing, we should connect the device & the leakage detection cable.

1.Special functions >> Leakage detection and voltage detection >> Leakage detection >> OK

2.Touch the probes at both ends of the leakage detection cable to the key chip to be tested.

The leakage current can be tested in the device screen.

We can see the value display.

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-3

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-4

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-5

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-6


How to Test Voltage?

1.Special functions >> Leakage detection and voltage detection >> Voltage detection >> OK

2.Touch the leakage detection cable to the battery. Black probe to negative, red probe to positive.


So you can see the display of test voltage on device now.

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-7

xhorse-vvdi-key-toosl-max-pro-new-features-instruction-8

http://blog.xhorse.co.uk/how-to-use-xhorse-vvdi-key-tool-max-pro-new-features/


Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI BEE Key Tool Lite Main Features Instruction

Image
Here we'll introduce the main features of Xhorse VVDI BEE Key Tool Lite , such as remote generation, frequency detection, generating transponder, transponder clone, IC/ID clone, etc. Remote Generation Key Tool Lite supports generating Xhorse remotes, including XK Wired Remotes , XN Wireless Remotes , XE Super Remotes , and XS Smart Keys . 1. If we wanna generate an XK series wired remote, we should connect the Key Tool Lite and the remote with a remote programming cable. 2. Then tap on "Vehicle Remote", and find the required wired remote option. Tap on "Generate". Note: DON'T install battery when generating XK series wired remotes. 1. If we wanna generate an XS series smart key, we also need to tap on "Vehicle Remote" and find the option in need. 2. Then place the Knife style universal smart key into the coil, and tap on "Generate". Now the generation is successful. Frequency Detection Key Tool Lite supports common remote frequency detec...
Read more

Xhorse VVDIKey Tool MIDI vs Key Tool Max Pro: Which to Buy?

Image
When it comes to automotive key programming and immobilizer solutions, Xhorse VVDI offers two popular tools: the Key Tool MIDI and Key Tool Max Pro . Both devices are powerful, but they cater to slightly different needs. Below, we break down their differences to help you decide which one is right for you. Comparison Table Key Difference 1. Functionality and Coverage Key Tool MIDI: (1) Supports a wider range of vehicle models, including VW/Audi/Skoda (4th Gen, MQB), Audi 5th Gen, Porsche MLB (with adapter), BMW CAS1-4, Land Rover/Jaguar (2015-2018), and Volvo. (2) Requires additional programmers or adapters for some functions. (3) Offers vehicle diagnostic functions and 8-pin EEPROM programmer support. Key Tool Max: (1) More limited in vehicle coverage (e.g., no support for VW/Audi MQB, Audi 5th Gen, or Porsche MLB). (2) Excels in BMW CAS1-3, Land Rover/Jaguar (2015-2018), and Volvo (similar to MIDI but lacks some advanced Audi/VW functions). (3) Does not support diagnostics or 8-pin E...
Read more

Xhorse VVDI BEE Key Tool Lite Unboxing Review

Image
Today we're gonna be introducing a new device - Xhorse VVDI BEE Key Tool Lite . Next, let's take a look at this package and make an unboxing review. What's in Xhorse Key Tool Lite Package? An instruction manual in English that gives a brief description of how to use the device. VVDI Key Tool Lite . 1 programming cable and 6 wired remotes as gifts. (Please notice the gifts are limited, first come first served.) Appearance & Function Review Key Tool Lite is very small and compact, its weight is only 33.4g. The coil is used to read transponder and remote data, detect remote frequency, and collect transponder data. It supports frequencies of 125KHz and 134KHz. 1. Remote frequency detection 2. Chip clone collection 3. Chip and remote reading coil 125KGz 134KHz The area below is used to identify the IC card. And there's a working status indicator. - If it is on, the device is in working mode. - A flashing light indicates that the device is upgrading. This side port is use...
Read more